home about turning point contact us sponsorship policies dealer login product support
 
MasterGuard Hub System
Rascal Aluminum Propelllers for 20hp-35hp Engines
Hustler Aluminum Propellers for 40hp-300+hp Engines
 
Express Stainless Steel Propellers for 40hp-300+hp Engines
 
SpeedZone Stainless Steel Propellers for 135hp-300+hp Engines
 
 
EVINRUDE / JOHNSON
 

Boat Propellers for EVINRUDE / JOHNSON Motors!
1. The correct MasterGuard Hub Kit needed is listed below.
2. Choose a propeller pitch from the list to the right of the propeller:
* MasterGuard Hub Kit is required for Turning Point propeller housings.
 
 
EVINRUDE / JOHNSON Props
 
V4 with V6 large gearcase: 100hp commercial / 120hp (1985) / 130hp (1995-96) /
140hp (1985) / 115 & 130hp Pleasure (95 & newer) / 90 E-TEC
V6: 135 to 250hp / V6 Sea Drives: 2.0 to 3.0L,
V8: 250 to 300hp / V8 Sea Drives: 3.6 to 4.0L
 
   
Aluminum Your hub kit is: Item# 32

High Performance Series
135hp - 300+hp
A true high performance aluminum propeller!
Prop housing options: *Hub kit is required
Dia. x Pitch
15-1/4 x 15
14-1/4 x 17
14-1/4 x 19
14-1/4 x 21
14-1/4 x 23
 Item #
H-1515
H-1417
H-1419
H-1421
H-1423
Stainless Steel Your hub kit is: Item# 42

High Performance Series
135hp - 300+hp
The best all-around stainless steel propeller in the business!
Prop housing options: *Hub kit is required
Dia. x Pitch
14-1/4 x 15
14-1/4 x 17
14-1/4 x 19
14-1/4 x 21
14-1/4 x 23
 Item #
E-1415
E-1417
E-1419
E-1421
E-1423
Stainless Steel Your hub kit is: Item# 42

Maximum Performance Series
150hp - 300+hp
For the Go-Fast crowd!
Prop housing options: *Hub kit is required
Dia. x Pitch
14-3/4 x 23
14-3/4 x 25
14-3/4 x 27
 Item #
S-1423
S-1425
S-1427
 
 
     
 
Find a prop and hub to fit your boating needs.
Select your engine
Select your state / province
USA CAN
   
International
Online Dealers
Quick Links
Propellers purchased before 2005 that use the MasterGurad rubber hub kit system.
 
 
 
©2005 Turning Point Propellers, Inc. 896 Cambridge Drive, Elk Grove Village, IL 60007 ph: 847.437.6800 fx: 847.437.6868 email: sales@turningpointpropellers.com
_Quick Pick Propeller Guide_________
According to your manual's recommended
WOT RPM range for your motor.....
- RPM's too high? (Move up in pitch)
- RPM's too low? (Move down in pitch)
- RPM's just right? (Stay with the same pitch)
 Note: For every 2" of pitch will raise or lower your
RPM's by 400(approx).

WOT RPM's for EVINRUDE / JOHNSON Motors
Check your manual or the list below for your motor's WOT RPM range.
At WOT your boat should ideally be running at the upper end of the
range for maximum performance. Water sports or extra people on board
may require a drop in pitch to meet the WOT RPM requirements.
Engine Model Drive Gear Ratio WOT RPM
135 - 2.25 5000-6000
150 - 1.86 4500-5500
150 DI - 1.86 4750-5250
175 - 1.86 4500-5500
175 DI - 1.86 5250-5750
200 - 1.86 5000-6000
200 4-Stroke - 2.29 5000-6000
200 DI - 1.86 5500-6000
225 - 1.86 5000-6000
225 4-Stroke - 2.29 5000-6000
225 DI - 1.86 5500-6000
250 - 1.86 5000-6000
250 DI - 1.86 5500-6000