home about turning point contact us sponsorship policies dealer login product support
 
MasterGuard Hub System
Rascal Aluminum Propelllers for 20hp-35hp Engines
Hustler Aluminum Propellers for 40hp-300+hp Engines
 
Express Stainless Steel Propellers for 40hp-300+hp Engines
 
SpeedZone Stainless Steel Propellers for 135hp-300+hp Engines
 
 
MERCURY & MARINER
 

Boat Propellers for MERCURY & MARINER Motors!
1. The correct MasterGuard Hub Kit needed is listed below.
2. Choose a propeller pitch from the list to the right of the propeller:
* MasterGuard Hub Kit is required for Turning Point propeller housings.
 
 
MERCURY & MARINER Props
 
V6 135 to 300hp
 
   
Aluminum Your hub kit is: Item# 31

High Performance Series
135hp - 300+hp
A true high performance aluminum propeller!
Prop housing options: *Hub kit is required
Dia. x Pitch
15-1/4 x 15
14-1/4 x 17
14-1/4 x 19
14-1/4 x 21
14-1/4 x 23
 Item #
H-1515
H-1417
H-1419
H-1421
H-1423
Stainless Steel Your hub kit is: Item# 41

High Performance Series
135hp - 300+hp
The best all-around stainless steel propeller in the business!
Prop housing options: *Hub kit is required
Dia. x Pitch
14-1/4 x 15
14-1/4 x 17
14-1/4 x 19
14-1/4 x 21
14-1/4 x 23
 Item #
E-1415
E-1417
E-1419
E-1421
E-1423
Stainless Steel Your hub kit is: Item# 41

Maximum Performance Series
150hp - 300+hp
For the Go-Fast crowd!
Prop housing options: *Hub kit is required
Dia. x Pitch
14-3/4 x 23
14-3/4 x 25
14-3/4 x 27
 Item #
S-1423
S-1425
S-1427
 
 
     
 
Find a prop and hub to fit your boating needs.
Select your engine
Select your state / province
USA CAN
   
International
Online Dealers
Quick Links
Propellers purchased before 2005 that use the MasterGurad rubber hub kit system.
 
 
 
©2005 Turning Point Propellers, Inc. 896 Cambridge Drive, Elk Grove Village, IL 60007 ph: 847.437.6800 fx: 847.437.6868 email: sales@turningpointpropellers.com
_Quick Pick Propeller Guide_________
According to your manual's recommended
WOT RPM range for your motor.....
- RPM's too high? (Move up in pitch)
- RPM's too low? (Move down in pitch)
- RPM's just right? (Stay with the same pitch)
 Note: For every 2" of pitch will raise or lower your
RPM's by 400(approx).

WOT RPM's for MERCURY & MARINER Motors
Check your manual or the list below for your motor's WOT RPM range.
At WOT your boat should ideally be running at the upper end of the
range for maximum performance. Water sports or extra people on board
may require a drop in pitch to meet the WOT RPM requirements.
Engine Model Drive Gear Ratio WOT RPM
135 OptiMax - 2 5000-5600
135 SW OptiMax - 2 5000-5600
150 EFI - 1.87 5000-5600
150 OptiMax - 1.87 5000-5600
150 OptiMax - 1.87 5000-5600
150 SW - 1.87 5000-5600
150 SW EFI - 1.87 5000-5600
150 XR6 - 1.87 5000-5600
175 EFI - 1.87 5000-5600
175 OptiMax - 1.87 5250-5750
200 Classic - 1.87 5000-5600
200 EFI - 1.87 5000-5800
200 EFI SW - 1.87 5000-5600
200 OptiMax - 1.75 5000-5750
200 SW - 1.87 5000-5600
225 EFI - 1.75 5000-5800
225 EFI SW - 1.75 5000-5800
225 OptiMax - 1.75 5000-5750
225 XL 4-stroke - 2 5000-6000
225 XL OptiMax SW - 1.75 5000-5750
250 XL EFI SW - 1.75 5000-5800