EVINRUDE / JOHNSON Props from Turning Point Propellers, Inc.

home

about turning point

sponsorship

policies

dealer login

product support


EVINRUDE / JOHNSON

Boat Propellers for EVINRUDE / JOHNSON Motors!

1. The correct MasterGuard Hub Kit needed is listed below.
2. Choose a propeller pitch from the list to the right of the propeller:
* MasterGuard Hub Kit is required for Turning Point propeller housings.

EVINRUDE / JOHNSON Props

2 stroke: 20hp, 25hp (84 & newer) /
25hp commercial (93 & newer) / 30hp (84 & newer) / 35hp (76 & newer)

Aluminum	Your hub kit is: Item# 22
Compact Series 20hp - 35hp Gets the most power and performance from smaller engines!
	Prop housing options: *Hub kit is required
	Dia. x Pitch 10-1/2 x 11 10-1/8 x 13	Item # R1-1011 R1-1013

Find a prop and hub to fit your boating needs.

Select your engine


	Select your state / province
	USA	CAN


	International
Online Dealers

Quick Links

Propellers purchased before 2005 that use the MasterGurad rubber hub kit system.

896 Cambridge Drive, Elk Grove Village, IL 60007

ph: 847.437.6800

fx: 847.437.6868

email: sales@turningpointpropellers.com

_Quick Pick Propeller Guide_________
According to your manual's recommended
WOT RPM range for your motor.....
- RPM's too high? (Move up in pitch)
- RPM's too low? (Move down in pitch)
- RPM's just right? (Stay with the same pitch)
Note: For every 2" of pitch will raise or lower your
RPM's by 400(approx).

WOT RPM's for EVINRUDE / JOHNSON Motors

Check your manual or the list below for your motor's WOT RPM range.

At WOT your boat should ideally be running at the upper end of the

range for maximum performance. Water sports or extra people on board

may require a drop in pitch to meet the WOT RPM requirements.

Engine Model	Drive	Gear Ratio	WOT RPM

25	-	2.15	4500-5500
25	-	2.15	5200-5800
30	-	2.15	5200-5800
35	-	2.15	5200-5800