OMC Props from Turning Point Propellers, Inc.

hEM

OM turning point

Kontakta OSS

Hem till grundsidan

vILLKOR

dealer login

produKt support


OMC

Boat Propellers for OMC Motors!

1. The correct MasterGuard Hub Kit needed is listed below.
2. Choose a propeller pitch from the list to the right of the propeller:
* MasterGuard Hub Kit is required for Turning Point propeller housings.

OMC Props

COBRA 400 stern drives 2.3 to 3.0L

Aluminum	Your hub kit is: Item# 33
High Performance Series 40hp - 150hp A true high performance aluminum propeller!
	Prop housing options: *Hub kit is required
	Dia. x Pitch 14 x 11 14 x 13 13-3/4 x 15 13-1/4 x 17 13-1/4 x 19 13-1/4 x 21 13-1/4 x 23	Item # H2-1411 H2-1413 H2-1315 H2-1317 H2-1319 H2-1321 H2-1323

Stainless Steel	Your hub kit is: Item# 43
High Performance Series 40hp - 150hp The best all-around stainless steel propeller in the business!
	Prop housing options: *Hub kit is required
	Dia. x Pitch 13-1/4 x 15 13-1/4 x 17 13-1/4 x 19 13-1/4 x 21	Item # E2-1315 E2-1317 E2-1319 E2-1321

Find a prop and hub to fit your boating needs.

Select your engine

896 Cambridge Drive, Elk Grove Village, IL 60007

ph: 847.437.6800

fx: 847.437.6868

email: sales@turningpointpropellers.com

_Quick Pick Propeller Guide_________
According to your manual's recommended
WOT RPM range for your motor.....
- RPM's too high? (Move up in pitch)
- RPM's too low? (Move down in pitch)
- RPM's just right? (Stay with the same pitch)
Note: For every 2" of pitch will raise or lower your
RPM's by 400(approx).

WOT RPM's for OMC Motors

Check your manual or the list below for your motor's WOT RPM range.

At WOT your boat should ideally be running at the upper end of the

range for maximum performance. Water sports or extra people on board

may require a drop in pitch to meet the WOT RPM requirements.

Engine Model	Drive	Gear Ratio	WOT RPM